Iseki SBC550FH, Руководство по эксплуатации

Страница: 38 / 152

CHAPTER 5. CONTROLS AND METERS
37
1.1. STARTER SWITCH
G
: Glow position: the engine is pre-heated.
$
: OFF position: the engine stops and all electric
circuits are turned off.
O
: ON position: the key turns to this position after starting
the engine and remains there during operation.
c
: START position: the starter motor is switched on.
1.2. WORK LAMP SWITCH
This switch turns the work lamp on and off.
l
: ON: Turn the switch lever towards this mark, and the
work lamps turn on and vice versa.
OFF: Off
1.3. POSITION SWITCH (G type)
The position light in combination lamp (Option) lights up
while this switch is ON.
: ON
R
: Off
1.4. COMBINATION SWITCH (G type)
This switch incorporates the head lamp switch, turn
signal switch and horn button.
The head light and turn signal and horn are set as
optional parts.
Head Lamp Switch
OFF: Off
Ò
: Low beam
l
: High beam
Turn Signal Switch
: Right-hand turn signal
R
: Off
: Left-hand turn signal
NOTE: Turing indicator lamps will not self-cancel.
Return the turn signal switch lever to the center
position after completing turn.
Horn Switch
The horn is activated by pushing the horn mark.
1.5. HAZARD SWITCH (G type)
The turning signal lamps (Option) blink while hazard
switch is pushed on.
The head light and turn signal and horn are set as
optional parts.
(1) Starter switch A: Glow position
B: OFF position
C: ON position
D: START position
(4) Combination switch
A: Head lamp switch
B: Turn signal switch
C: Horn switch
FIG. 27
A
B
C
D
1
FIG. 28
B
A
C