GLS Sampler
3-10
3.5 Errors
The GLS can detect program errors or
conditions that have caused it to miss a sample.
If the GLS encounters an error condition and is
still running a program, it alternates the
message below with the current display.
The GLS also makes an entry in the Log, which
can be viewed later to determine the cause.
Possible log entries are:
•
No liquid detected
- The GLS did not
detect any liquid.
•
No more liquid
- The GLS did detect
liquid during the fill cycle, but it stopped
detecting liquid before a complete sample
volume was collected.
•
Power fail
- Power was lost and caused
the GLS to miss a sample.
•
User stopped pump
- The user pressed
the Stop button while the GLS was
collecting a sample.
•
Paused
- The GLS was in the paused
state when a sample was to have been
initiated.
•
Pump jammed
- The GLS pump jammed
during a sample collection cycle.
•
Program halted
- Remaining samples
were not collected because the program
was halted.
ERRORS HAVE OCCURRED
Содержание GLS
Страница 2: ......
