ISC PCI6000, Руководство пользователя

Страница: 28 / 172

3.4 Front Service Indicator
If the service utility is installed in the PCI6000 BIOS (D version and newer) the service
indicator in the front foil will light up the red LED when ever temperature, fans speed, or
voltages exceed its maximum violation values. If the violation disappear the LED will still
be turned on until reset.
To inspect the system parameters start the ISC hardware monitor program and check para-
meters. This program may also turn the LED off if the violation is removed. System reset
will also reset the LED.
Please go to part 4 to install the Hardware monitor diagnostic software. Please be aware
that the service LED placed in the front will operate independent of the software utility.
Fixed system parameters are shown below:
CPU die temperature : max. 100°C
CPU module temperature : max. 75°C
System zone temperature : max. 75°C
Service zone temperature : max. 60°C
Front zone temperature : max. 60°C
Level 1 Fan speed : min. 1000 RPM
Front Fan speed : min. 1000 RPM
Voltage 5V, 3.3V : max. ± 5% (rel. +5V)
Voltage -5V, ±12V : ±10%
16 Part 2 PCI6000 Maintenance
Released