ISC DW200, Руководство пользователя

Страница: 2 / 24

2
Deadweight
DW200.2: Issue A - Aug 2017
+
2 1
Deadweight Anchors
DW200 A Frame
A
1
X = ≤ 5°
X
X
General Limitations
This DW200.2 A Frame is primarily designed and tested to be used as a portable anchor device for
Rope Access (work positioning) systems/activities.
The DW200.2 A Frame has been tested in accordance with EN795: 2012 Type E by SATRA in the
UK and CE marked accordingly.
The unit has been further tested and found to meet the requirements of PD CEN/TS 16415: 2013 ‘an-
chor devices for two person rescue’ and also the IRATA and SPRAT ICoP requirement that anchors
for rope access must meet a 15kN static test.
For rope access standards requirements please refer to ISO 22846-1:2003, BS7985: 2002, BS
EN12841: 2006, BS7883 or equivalent international standards and Codes of Practice.
Installation Considerations
• Roof surface is appropriate, i.e. Surface material, ballast, water, foreign matter, angle. All of these
factors could affect the frictional resistance of the device and create a hazard
• All loose surface material should be removed before assembly and installation of the device
Users of this equipment shall be able to demonstrate either in-house expertise or hold suitable train-
ing certificates in Working at Height / industrial rope access
Rescue – The device has a Maximum Rated Load of 200kg (440lbs) and can be used for a 2 person
load in a rescue situation in accordance with PD CEN/TS 16415: 2013
There must be sufficient free space beneath the user at the work area before each occasion of use,
so that in the case of a dynamic event there will be no collision with the ground or other obstacles
in the fall path