ISA ISABELLA LX 10, Руководство пользователя

Страница: 7 / 26

7
ISABELLA LX
USE AND MAINTENANCE MANUAL
428000085137
EN R404A
2.2.3 Sectioning the electricity supply
Before conducting any maintenance work on the equipment or part of it, it is necessary to
section the power supply that powers it
.
Danger
Please remember to fully disconnect the equipment from the power supply in the event of maintenance
work during which the operator cannot prevent any accidental closure of the circuit by other people.
2.3 Residual risks
During design the manufacturer examined all the areas or parts at risk. Therefore, all
necessary precautions have been taken to prevent risks to persons and damage to the
equipment as mentioned earlier.
Attention
Periodically check that all safety devices are operating correctly.
Do not remove the fi xed protective devices.
Do not introduce foreign objects or tools into the operational and working area.
Although the equipment is fi tted with the aforementioned safety devices, there are still
some risks that cannot be eliminated, but reduced via corrective actions by the fi nal
integrator and correct operational procedures.
Below is a summary of the remaining risks associated with the equipment during:
- Normal operation
- Adjustments and tweaking
- Maintenance
- Cleaning.
2.3.1 Risk of contact with live parts
Risk of breaking or damaging the electrical components of the equipment, with a possible
reduction in safety levels, following a short circuit.
Before connecting the electricity supply, make sure there is no ongoing maintenance work.
Attention
Before making the connection, check that the d/c electricity at the point of installation is no higher than
the value indicated on the protective switches on the fuse box. if it is, the user is responsible for fi tting
the relevant limiting devices.
It is strictly forbidden to conduct any electrical modifi cation, in order to prevent additional unforeseen
hazards and risks.
2.3.2 Fire
Danger
In the event of a fi re, immediately disconnect the master switch from the main power supply line.