GSM router iRZ RCA (CDMA 450)
User Manual
16
in the address line of the browser; click the link "iRZ RCA Router". Enter username "root",
password "root" in the open window. Router web-interface will open. Click the tab "Configuration"
and select "LAN". You'll be directed to the router network connection configuration page. Available
options menu is on the left.
3.2.3. Configuring Network Connection Settings
Specify IP address of the router in the IP Address line.
This address should be free in the local network. If necessary, change the subnet mask (field
“Subnet Mask”) and specify the desired DHCP-server settings. Note that if you want the computers
in the network to use the Internet connection established by the router, you need to indicate the IP
address of the router as the default gateway in the computers network settings. You may also need to
specify IP address of the router in the field “DNS server”.
3.2.4. GSM Connection Configuring
Once the router is connected, and the network connection is set up, you can configure GSM
connection. To do this choose menu item "Internet" in web-interface tab "Configuration".
To make a connection with the Internet you need to know the access point name (APN),
username and password. This information can be obtained from your mobile operator. Indicate R-
UIM card number. Enter APN, Username and Password values in the appropriate fields. Click
"Apply" to save the settings and make a connection. After a while the connection will be established.
Its status can be checked on the tab "Status and log" in the menu item "Internet".
3.2.5. Settings reset
If, due to incorrect settings you cannot access the router interface, or you forgot your password,
you can revert to factory settings as follows:
·
Switch on router;
·
Press and hold the reset button (Figure 2.5.1);
·
Reset is confirmed by triple flashing of load indicator;
·
Release the reset button.
After resetting the device will be available at the address 192.168.1.1 with the username
root
and password
root.
