IRSAP WINGS 1000, Руководство пользователя

Страница: 60 / 104

60
N° Default value & other possibilities
00 RF INI: Radio Configuration
01 Language : French / English
02 dEG: display of unit of temperature measure : °C Celsius - °F Fahrenheit
03 __:__ selects the unit of time measure
24H (24:00)
12H (12:00 AM /PM)
04 dst: Change timetable Summer/Winter
YES timetable changes automatically according to the date.
NO no automatic change
05 AirC: Calibration of the internal probe
Calibration must be carried out after 1 day of work with the same ambient temperature,
following the description below: Put a thermometer in the room at a distance of 1.5 m
from the floor and check the real temperature in the room after 1 hour. When you enter
the calibration parameter the word “no” is shown on the right to indicate the absence of
calibra tion. To insert the value shown on the thermometer, use the keys ( -) or (+) Then
press OK to confirm. The message “Yes” should appear, the value will be stored in the
internal memory. If you need to delete a set calibration value, press the Escape ( )
key. The previous value is deleted and the message “no” is shown.
06 Remote software version
07 Blower software version
08 Clr ALL: Reset to Factory setting
Press and hold down the OK key for 10 sec. All the user configurations will be reset
and the factory settings will be restored.
IMPORTANT: Make sure you have all the elements needed for reconfiguring .
09 End: Exit the parameters menu
Press the OK key to leave the menu.
OTHER INFORMATION: