IRSAP WINGS 1000, Руководство пользователя

Страница: 51 / 104

51
OPERATION IN MANUAL MODE
(MODEL WITH REMOTE CONTROL)
To select MANUAL OPERATION, press the navigation keys NAV on the remote control until the manual symbol is
boxed,
then press OK to confirm
Choose the type of function with the + or – keys
•
BLOWER (bLO - SOU)
•
RADIATOR (RAd - RAd)
•
BOTH (ALL - TOU)
Confirm your choice by pressing OK. With this choice you can operate either the radiator alone, the blower alone,
or both together.
Now with the + or – keys you can set the blower operating time. The operating time can be adjusted from 15
minutes to 2 hours in 15 - minutes steps. The respective leds will light up on the blower: BLOWER or RADIATOR
or RADIATOR.
During selection of the time interval on the remote control, the following are displayed:

The temperature;

The countdown of the set time (blinking);

The active function (e.g. manual in this case);
At any time with the + or – keys you can:

Increase or decrease the set time

To stop the blower reset the operating time stop the blower by resetting the operating time (setting the
value at 00:00) and leaving the manual function with the ESCAPE key ( ).