HOW TO SET THE
CURRENT TIME & DAY
- CONTINUED
8
Before you can program the controller for watering, you must set the
current time and day of the week. This information is used to control
the watering schedules. Once set, the time and day apply to all pro-
grams. To set the day and time, follow the steps below. To change the
day or time,
the same steps.
IF YOU MAKE A MISTAKE
If you make a mistake while programming, the controller displays an
error message. Press the
Clear
key; then try again.
SETTING THE TIME
1. Set the dial to any program (e.g., Program 1).
2. Using the number keys, key in the current time. You must enter
both the hours
and
the minutes.
3. To indicate P.M., press the
PM
key. The controller will now display
an apostrophe
(‘)
before the time. For
A
.
M
., skip this step.
4. Press the
Set Time key.
NOTE:
Midnight is 12:00
A
.
M
.;
noon is 12:OO
P
.
M
.
EXAMPLE A:
PROGRAM
To set the time to 10:25
A
.
M
.
set the dial to Program 1:
Then press:
The controller displays:
EXAMPLE B:
.
.
To set the time to 3:23
P.M.
set the dial to Program 1:
.
Then press:
How to Set the Current Time and Day
How to Set the Current Time and
Day
