INSTALLING WIRING
THE CONTROLLER
This section includes instructions for installing the controller and
hooking up the electricity. To ensure safe operation, it is important to
follow the instructions carefully. The following topics are covered:
l
Selecting the site
l
Mounting the controller
l
Connecting the power
l
Hooking up the valves
-Testing the valve hook-ups
- I f you have a
pump
l
How the backup system works
l
Installing and using sensor ports
l
How the electronic circuit breaker works
C A U T I O N : To avoid injury to you or damage to the controller, you
MUST follow the sequence of installation steps outlined
in this manual.
SELECTING THE SITE
The controller comes in an outdoor, rain-resistant, rust-resistant and
dust-resistant box. The correct location is essential to ensure safe
operation. Select a site for the controller that is:
1. Away from direct sprinkler spray.
2. Accessible to a 3-wire, grounded 120-volt AC, 60 Hz power supply.
C A U T I O N : DO NOT place controller where it is
exposed to temperatures exceeding 130°F.
MOUNTING THE CONTROLLER
WALL MOUNT: For wall mounting, install the controller vertically
on a flat, secure surface. Use the enclosed template to locate mounting
screw holes. Follow complete mounting instructions on template.
PEDESTAL: For free-standing installation on a pedestal, follow the
installation instructions in the pedestal box.
Installing and Wiring the Controller
1
