Irradio CDMP-327U, Руководство пользователя

Страница: 30 / 47

ENG-12
TROUBLESHOOTING
TROUBLESHOOTING
If a problem occurs, check the points below before taking the apparatus in for repair.
Do not open the apparatus to prevent all risk of electrocution.
If you are unable to solve a problem using the indications provided below, contact your dealer or
after-sales service center.
WARNING: Under no circumstances should you attempt to repair the apparatus yourself; doing so
will void the guarantee.
- Problem
• Solution
NO SOUND/ELECTRICAL POWER
- The volume is not properly set.
• Adjust the volume
-- The electrical power cord is not plugged in
correctly.
• Check the power cord connections.
- The batteries are dead/not inserted correctly.
• Check the installation and charge of the
batteries.
THE DISPLAY UNIT DOES NOT FUNCTION
CORRECTLY / THE BUTTONS DO NOT
FUNCTION
- Electrostatic discharge.
• Turn the unit off and disconnect it. Plug it back
in a few seconds later.
POOR CASSETTE SOUND QUALITY
- Dust and dirt on the heads, etc.
•Clean deck parts etc., See Maintenance
- Use of incompatible cassette types
(METAL or CHROME)
• Only use NORMAL (IEC I) for recording
RECORDING DOES NOT WORK
- Cassette tab(s) may be broken
• Apply a piece of adhesive tape over the missing
tab space.
NO INFORMATION DISPLAYED ABOUT THE
DISC
- No CD in the player.
• Insert a CD, CD-R or CD-RW in the player.
- The CD is scratched or very dirty.
• Replace/clean CD. Refer to the section entitled
“Maintenance”.
- The laser lens is covered with condensation.
• Wait until condensation disappears from the
lens.
- The CD-R is blank or the disc is not finalized.
• Use a finalized CD-R.
THE CD IS NOT READ
- The CD is scratched or very dirty.
• Replace/clean the CD. Refer to the
“Maintenance” selection.
- The laser lens is covered with condensation.
• Wait until condensation disappears from the
lens.
THE CD SKIPS TRACKS
- The CD is dirty or scratched.
• Replace/clean the CD. Refer to the
“Maintenance” selection.
- A program sequence is activated.
• Exit the programming mode(s).
SPECIFICATIONS
(The technical characteristics are liable to change without notice)
GENERAL
Power supply
Dimensions of unit
Weight
Frequency range
AUDIO SECTION
Output power (RMS)
Speaker
Headphone
: AC 230V ~ 50Hz
: DC 9V 6 x UM-2/R14 batteries (not included)
: 260(L) x 225(W) x 160(H) mm
: 2.11Kgs
: AM 520 to 1606,5KHz
: FM 87,5 to 108MHz
: 2 x 1.2W RMS
: 8 Ohms
: ø 3.5mm
ENG-13