Irradio CDMP-327U, Руководство пользователя

Страница: 28 / 47

ENG-10
USE WITH A USB KEY
MP3
MP3 USB
1. Slide the FUNCTION SELECTOR to CD/MP3/USB.
2. Insert your USB key into the USB jack.
3. Press and hold PLAY/PAUSE for 2 seconds to switch from CD/MP3 mode to USB mode.
The display unit shows:
4. Start playback by pressing PLAY/PAUSE.
5. To stop playback, press STOP.
Press PLAY/PAUSE again for 2 seconds to return to CD/MP3 mode.
The display unit shows:
NOTE: Before removing your USB key, press STOP then press and hold PLAY/PAUSE for 2
seconds to return to CD/MP3 mode.
(CD MODE)
(MP3 MODE)
(USB MODE)
4 PLAY/PAUSE BUTTON
USB JACK
MAINTENANCE & SAFETY
ENG-11
O P E R A T I N G P R E C A U T I O N S A N D G E N E R A L
MAINTENANCE
Place the unit on a hard and plane surface to ensure that
it does not tip over.
Do not expose the unit, batteries or the CDs to humidity,
rain, sand or an excessive source of heat from a heater or
direct sunlight.
No not open the apparatus. A gap of at least 15 cm must
be kept between the ventilation openings and the
surrounding surfaces in order to ensure sufficient
ventilation and avoid all accumulation of heat.
The unit's mechanism features self-lubricating bearings
and thus do not require grease or lubrication.
Use a soft and dry cloth to clean the unit. Never use
cleaning agents containing alcohol, ammonia, benzene or
abrasives, which may damage the cabinet.
•
•
•
•
•
CLEANING CDs
Use a soft and clean cloth to wipe away fingerprints or dust from the surface of the disc.
Wipe in a straight motion from the center to the edge. Very small dust particles and slight smudges
have absolutely no effect on the sound quality.
Never use chemical products such as sprays for conventional (vinyl) records, anti-static aerosols,
benzene or thinners to clean your CDs.
To reduce the risk of scratches, always store CDs in their case when not used.
Do not expose CDs to direct sunlight, high humidity or excessively high temperatures for long
periods of time.
Never write or affix labels to the CD's surfaces.
•
•
•
•
•
•
CLEANING THE LENS
If the lens is dirty, the sound may skip and the CD may not be read correctly. Open the CD door and
clean the lens as follows:
Unplug the power cord.
ust or dry particles:
Blow on the lens several times using a camera lens brush, then wipe it gently with the brush to
remove the dust. Then blow again on the lens.
Fingerprints:
If you are unable to clean the lens with the camera lens brush, use a dry cotton swab to clean the
surface, from the center to the outside.
•
• D
•