Ironton 61453, Руководство пользователя

Страница: 11 / 18

Page 11 of 18
Before Each Use
⚠
WARNING

Check for damaged or worn parts like abrasive wheels, backing pad, wire brush, etc.

Keep bystanders a safe distance away from work area.

Use clamps (not included) or other practical ways to secure and support the workpiece to a stable
platform.
Operating Instructions
⚠
WARNING

To reduce the risk of injury always wear eye protection

To reduce the risk of injury, use only accessories rated at least equal to the maximum speed
marked on the tool

Use only wheel types that are recommended for your power tool and the specific guard designed
for the selected wheel.To reduce the risk of injury, always use proper guards when grinding.

Hold power tools by insulated gripping surfaces, when performing an operation where the cutting
tool may contact hidden wiring or its own cord.

Do not operate the angle grinder near flammable materials.

Position the cord clear of the spinning accessory.

Do not use accessories that require liquid coolants.

Never apply excessive pressure to the disc it might shatter causing personal injury.

Ensure the work piec e to be ground or cut is held tight in the vice or other clamping system.

Make sure that the disc is not in contact with the work surface when you start the grinder.

Do not secure the angle grinder in a vice or work bench and use it as a static grinder. It leads to
serious injury.

Fully unwind cable drum extensions to avoid potential overheating.

Do not use cutting off wheel for side grinding.

Ensure that sparks resulting from use do not create a hazard e.g. do not hit persons, or ignite
flammable substances.Do not overload.

Allow the grinder to come up to full speed before touching the work material.

Never lay the grinder down until it has come to a complete stop.