background image

Page 4 of 18 

 

Intended Use 

The Ironton 7 Inch Angle Grinder is intended for grinding metal and stone materials without using 
water. Provide quick stock removal and efficient shaping, grinding and cutting of metal. 

Packaging Contents 

 

Angle 
Grinder 

 

Wheel Guard 

 

Side 
Handle 

 

Carbon Brush 

 

Owner’s 
Manual 

Technical Specifications 

Property 

Specification 

Motor 

110V / 60Hz / 11A 

Wheel Diameter 

7

” 

Spindle Thread 

5/8

”- 11 UNC 

Speed 

9000 RPM 

Important Safety Information 

WARNING

 

 

Read and understand all instructions. Failure to follow all instructions may result in serious injury 
or property damage. 

 

The warnings, cautions, and instructions in this manual cannot cover all possible conditions or 
situations that could occur. Exercise common sense and caution when using this tool. Always be 
aware of the environment and ensure that the tool is used in a safe and responsible manner.  

 

Do not allow persons to operate or assemble the product until they have read this manual and 
have developed a thorough understanding of how it works. 

 

Do not modify this product in any way. Unauthorized modification may impair the function and/or 
safety and could affect the life of the product. There are specific applications for which the product 
was designed.  

 

Use the right tool for the job. DO NOT attempt to force small equipment to do the work of larger 
industrial equipment. There are certain applications for which this equipment was designed. This 
product will be safer and do a better job at the capacity for which it was intended. DO NOT use 
this equipment for a purpose for which it was not intended. 

 

Industrial or commercial applications must follow OSHA requirements. 

 

WARNING

 

WORK AREA SAFETY 

 

Inspect the work area before each use. Keep work area clean, dry, free of clutter, and well-lit. 
Cluttered, wet, or dark work areas can result in injury. Using the product in confined work areas 
may put you dangerously close to cutting tools and rotating parts. 

 

Do not use the product where there is a risk of causing a fire or an explosion; e.g., in the presence 

Содержание 61453



















Отзывы: