Page of 14
11
16. To prevent a new grinding disc from digging in to the work piece, initial grinding should be
conducted by drawing the Angle Grinder towards you. Once the leading edge of the disc is
worn a little, it’s possible to grind in any direction.
17. It should never be necessary to force the tool. If the rotational speed drops abnormally,
pressure should be released immediately. Little more than the weight of the tool should be
applied. Forcing and excessive pressure can cause dangerous disc breakage or damage to
the tool.
MAINTENANCE
•
Maintain your Angle Grinder.
It is recommended that the general condition of any Angle Grinder be
examined before it is used. Keep your Angle Grinder in good repair by adopting a program of
conscientious repair and maintenance. Have necessary repairs made by qualified service personnel.
•
When not in use the Angle Grinder should be stored in a dry, frost-free location not within the reach
of children.
•
Keep ventilation slots of the Angle Grinder clean at all times and prevent any foreign matter from
entering them.
•
If the Angle Grinder enclosure requires cleaning do not use solvents; use a moist soft cloth only.
•
The grease in the gearbox will require replacement/replenishment after extensive use of the Angle
Grinder. Please see your authorized service agent to provide this service.
•
Regularly check the carbon brushes. Brushes should be replaced before they wear out. Both
brushes should be replaced at the same time.
•
If the supply cord of this power tool is damaged
, the tool should be disposed of properly and
replaced with a new tool.