Ironton 45988, Руководство пользователя, Страница: 8 / 30

Page of 30 8
ASSEMBLE THE STAND (fig. 1-6)
• Unpack all of the parts, and group them by type and
size. Refer to the parts list for correct quantities. (See
Fig. 1)
• Attach the tubes of the stand assembly (B) with the
corresponding tubes of the stand assembly (A) and
align the holes. (See Fig. 2)
• Place the flat washer M8 (M), leveling foot (K)
before insert the bolt M8 x 60 (L) into hole and put
the flat washer M8 (M) on the opposite to the tube,
then tighten the knob (F) with hex key tightening the
bolt (L). (See Fig. 3)
• Insert the bolt with leveling foot (D) into hole, and
put flat washer M8 (M) on the opposite tube, then
tighten the knob (F), and you can See Fig. 4.