Ironton 45988, Руководство пользователя, Страница: 5 / 30

Page of 30 5
TABLE SAW USE AND CARE
•
Do not modify the Table Saw in any way. Unauthorized modification may impair the function
and/or safety and could affect the life of the equipment. There are specific applications for which
the Table Saw was designed.
•
Always check of damaged or worn out parts before using the Table Saw. Broken parts will
affect the Table Saw operation. Replace or repair damaged or worn parts immediately.
•
Store idle Table Saw. When Table Saw is not in use, store it in a secure place out of the reach
of children. Inspect it for good working condition prior to storage and before re-use.
•
No other people are allowed to stand in the direct vicinity of the machine when it is in use.
People not operating the machine must maintain a suitable safe distance.
•
Never lay the power cable over the saw table.
•
Use the push rod to pass the workpiece safely into the saw blade. Do not come too close to the
saw blade.
•
Make sure that the thickness of the material to be cut is less than the maximum possible cutting
depth.
•
Never cut “handsfree.” The workpiece must always lie level on the machine table and be
moved along the stop! The workpiece must always be pressed hard against the stop.
•
Never cut workpieces that are so small that they cannot be safety pressed against the stop and
could turn.
•
Never cut workpieces that are so small that they cannot be moved by the push rod at a safe
distance from the saw blade.
•
Only cut one workpiece at a time. Never cut several workpieces simultaneously. Workpiece
must not be placed behind or on top of each other. There is a danger of the workpiece
“jamming” and slipping away.
•
Make sure that the workpiece cannot slip while cutting or get jammed in the saw blade.
•
Clean the working area and the workpiece after each cut.
WARNING:
Switch the tool off, remove the plug from the power socket and let the machine
come to a standstill. No foreign bodies are allowed to be on the workpiece or the machine table. Cut
pieces of the workpiece can be caught by the rotating cutting disc and be flung away.
•
Never reach into the openings of the table saw. Never insert objects into the openings of the
tool (e.g. the saw blade casing, dust extraction adaptor). Danger of cuts.
•
Never remove the cutting piece if the machine is still switched on or running. Danger of cutting
yourself.
•
Cut workpieces may have sharp edges, ridges or wooden splinters. Danger of cutting injuries.
•
Always switch the machine off and remove the power plug when your leave the machine.
•
Never expose the tool to rain or extreme moisture.
•
Do not perform any cuts with this table saw, other than those described in these operating
instructions. Do not saw seams and notches.
•
This table saw cannot to be used for slitting (notches which end in the workpiece).