Ironton 45988, Руководство пользователя, Страница: 2 / 30

Page of 30 2
Thank you very much for choosing an Ironton product! For future reference, please complete
the owner’s record below:
Model: _______________ Purchase Date: _______________
Save the receipt, warranty and these instructions. It is important that you read the entire manual
to become familiar with this product before you begin using it.
This machine is designed for certain applications only. The distributor cannot be responsible for
issues arising from modification. We strongly recommend this machine not be modified and/or
used for any application other than that for which it was designed. If you have any questions
relative to a particular application, DO NOT use the machine until you have first contacted the
distributor to determine if it can or should be performed on the product.
For technical questions please call
1-800-222-5381 .
INTENDED USE
The Ironton Table Saw has been designed to cut timber and timber products. The large work
table with easy to install side tables provide greater stability when cutting larger workpieces.
Designed for multi-purpose applications such as ripping and crosscuts of timber, chipboard and
plywood. The saw can be tilted up to 45º for miter cuts.
Stand with anti slip rubber feet provides full support and stability. Wheels on the stand make it
easy to maneuver and transport.
TECHNICAL SPECIFICATIONS
Capacity with 10 in. Blade:
Depth of cut at 90° 3-1/8 in.
Maximum tilt angle of arbor (left) 45°
Depth of cut at 45° 2-5/32 in.
Max. cut right of blade with rip fence 24-1/2 in.
Saw Dimensions:
Cabinet depth 11-13/32 in.
Cabinet width 20-3/4 in.
Cabinet length 25-15/32 in.
Main table 24 x 21-1/16 in.
Right extension table 5-63/64 x 21-1/16 in.
Rear extension table 24 x 2-35/64 in.
Saw blade:
Blade max. capacity
10 in.
Blade arbor 5/8 in.
Saw Constructions:
Cabinet
Plastic
Table Cast aluminum
Rip fence Aluminum extrusion
Drive system By gear
Miter gauge Cast aluminum with T-slot roller guide
Blade guard Acrylic with anti-kickback pawls
Motor 120 V, 15 A, 60 Hz
No load speed 4500 RPM
Net weight 81.4 lbs