Ironton 32185, Руководство пользователя

Страница: 3 / 13

Page of 13 3
GENERAL SAFETY RULES
WARNING:
Read and understand all instructions. Failure to follow all instructions listed
below may result in serious injury.
CAUTION:
Do not allow persons to operate or assemble this Rotary Hammer
until they have read this manual and have developed a thorough understanding of how the
Rotary Hammer works.
WARNING:
The warnings, cautions, and instructions discussed in this instruction
manual cannot cover all possible conditions or situations that could occur. It must be
understood by the operator that common sense and caution are factors which cannot be built into
this product, but must be supplied by the operator.
SAVE THESE INSTRUCTIONS
IMPORTANT SAFETY CONSIDERATIONS
ROTARY HAMMER USE AND CARE
 Do not modify the Rotary Hammer in any way. Unauthorized modification may impair the
function and/or safety and could affect the life of the equipment. There are specific
applications for which the Rotary Hammer was designed.
 Always check of damaged or worn out parts before using the Rotary Hammer Broken
parts will affect the Rotary Hammer’s operation. Replace or repair damaged or worn parts
immediately.
 Store idle Rotary Hammer. When Rotary Hammer is not in use, store it in a secure place
out of the reach of children. Inspect it for good working condition prior to storage and before
reuse.
 Wear hearing protection. Exposure to noise can cause hearing loss.
 Use the auxiliary handle supplied with the power tool. Loss of control over the power
tool can cause personal injury.
 Use suitable detectors to determine if utility lines are hidden in the work area or call
the
 local utility company for assistance. Contact with electric lines can lead to fire and
electric shock. Damaging a gas line can lead to explosion. Penetrating a water line causes
property damage or may cause an electric shock.
 Hold the power tool only by the insulated gripping surfaces when performing an
operation where the cutting tool may contact hidden wiring or its own power cord.
Contact with a “live” wire will also make exposed metal parts of the power tool “live” and