Page 2 of 18
BBR085E
Installation Guide
©Copyright 2022 Ironman 4x4 Pty Ltd. No part of this publication may be reproduced or replicated without the prior written consent of Ironman 4x4 Pty Ltd
PLEASE NOTE:
It is always good practice to disconnect the battery while working on 12-Volt systems.
Please check owner’s manual to see vehicle specific requirements as some models may
need battery backup.
Caution: Auto electrical work should only be carried out by a competent person. Vehicle
wire colours are listed as a guide and may vary on some makes and models. The function
of each wire should be checked before any connections are made.
All wires tapped into the factory harness should be soldered and then insulated with
electrical tape or heat shrink.
Using only a LED test light, test all electrical components of the vehicle before and after
wiring. This is to ensure that everything works correctly.
IMPORTANT:
Bull Bar installations should only be done by a qualified person, and it is the responsibility
of this person to ensure correct fitment.
Read instructions fully before commencing fitment.
Do not remove labels from this bull bar. It is good practice to record the bull bar batch
number on the customer’s job card for future reference.
BULL BAR CARE INSTRUCTIONS:
To maintain finish of the product, wash regularly using a PH neutral Car wash, hose
off and chamois dry. Do not use acidic or alkaline cleaners. Plastic components can be
maintained with a silicon spray or similar (non-acidic or alkaline based)
The fitting instructions are correct at the time of publication date. Ironman 4x4 cannot be
held responsible for any vehicle manufacturer changes. It is the installers responsibility to
ensure correct fitment.
NOTE:
Optional light Options
Optional centre light bar ILBDR002B (Requires x1)
Optional Cube lights: (can install up to x 4 cube lights)
40W BRIGHT CUBE SPOT BEAM - Part Number: ILED80B
40W BRIGHT CUBE SPOT BEAM - AMBER COLOUR Part Number: ILED80BA
40W BRIGHT CUBE FLOOD BEAM - CLEAR COLOUR ILED80BF
40W BRIGHT CUBE FLOOD BEAM - AMBER COLOUR Part Number: ILED80BFA
It is important to work safely and use appropriate safety equipment while working.
Page 2 of 18
©Copyright 2022 Ironman 4x4 Pty Ltd. No part of this publication may be reproduced or replicated without the prior written consent of Ironman 4x4 Pty Ltd
Before Installation
Installation Guide
