background image

 Roomba

®

 s Series Owner’s Guide

        7

EN

Pinch the brush frame release tab, 

lift the brush frame, and remove 

any obstructions.

Remove the brushes from the 

robot. Remove the brush caps 

from the ends of the brushes. 

Remove any hair or debris that 

has collected beneath the 

caps. Reinstall the brush caps.

Cleaning the Multi-Surface Brushes

Remove any hair or debris 

from the square and star 

pegs on the opposite side 

of the brushes. 

Remove the bin from the 

robot and clear any debris  

from the vacuum path.

Reinstall the brushes in the robot. 

Match the shape of the brush pegs 

with the shape of the brush icons in 

the cleaning head module.

1

2

3

4

5

Cleaning the Rear Caster Wheel

Pull firmly on the rear caster wheel module to 

remove it from the robot.

 

Press firmly on the wheel to remove it from its 

housing (see illustration below).

Remove any debris from inside the wheel cavity.

Reinstall all parts when finished.  

Make sure the wheel clicks back into place. 

Important: 

A rear wheel clogged with hair and debris 

could result in damage to your floor. If the wheel is not 

spinning freely after you have cleaned it, please contact 

Customer Care.

1
2
3
4

Wheel

Axle

Housing

Содержание Roomba ADB-N1

















Отзывы: