IRISTICK H1, Руководство пользователя

Страница: 26 / 40

Connector piece
The connector piece can be screwed onto both flat sides of
the Iristick.H1. This allows for the display to be positioned in
front of the wearer's dominant
22
(left or right) eye.
To install or change the connector piece, please follow
these steps:
1.
2.
3.
4.
25
22
Determine your dominant eye via the following link (video):
https:// support.iristick.com/dominant-eye
Determine your dominant eye. You can use the video
that can be found on our support page, via the link:
https://support.iristick.com/dominant-eye
Position the Iristick.H1 flat on a surface with the display
positioned on the side of your dominant eye and the
cameras faced front.
- in this example, the wearer is left-eye dominant as the
display is positioned on the left
Screw the connector piece onto the top of the body of
the Iristick. H1 device with the hex key (1. 5mm).
Unscrew the connector piece first from the other side
of the device if already connected.
Slide the attached connector piece into the holder that
is attached to the headband or helmet.