MOUNTING THE QP-1800
The primary method of mounting is using a mounting bracket as shown on
page 13.
However, for unique mission requirements, the QP-1800 can be mounted
on a horizontal or vertical surface (see page 12). The control panel can be
removed and re-attached in different orientations to match the various
mounting options.
Vibration Isolators must be installed to prevent
damage to the inverter.
The QP-1800 requires a minimum of 5 inches of free space on all sides,
the more clearance the better the performance.
Do not install the QP-1800 in the same compartment as batteries. Do not
mount in an area subject to splashing or dripping water.
Page 11
