HOW TO ENABLE POWERSAVE
1. Turn the control panel switch to the ‘O’ position.
2. Switch the unit back to the ‘I’ position. You will see the initial
power-up information being displayed (model/voltage/frequency).
3. When the control panel displays “POWERSAVE OFF” turn the
switch back to the ‘O’ position, wait for approximately three seconds,
and then turn the switch back to the ‘I’ position again. The initial
power-up information will be displayed again except now the display
will show “POWERSAVE ON”. A small pointer will be visible
indicating POWERSAVE as enabled. Follow the same procedures
when disabling the POWERSAVE mode.
Page 24
