QP-1800 OPERATING INSTRUCTIONS
1. Move rocker switch to the ‘I’ position. The following will be displayed:
model number (1800 watt), input voltage, output voltage, frequency
configuration, and POWERSAVE mode OFF.
2. Following the initial display, the display panel defaults to the
standard
display
information showing input voltage, input current and output power.
When a load is connected, the output power (watts) is displayed in bar-graph
form.
3. Once the
standard display
screen is shown, the QP-1800 is ready to
deliver AC power to your equipment.
4. Monitor voltage regularly. With no load and engine at fast idle, the display
should read 27.5 to 28.5 volts. When operating with the engine off, if voltage
drops below 23 volts you may not have enough reserve energy to start the
vehicle.
Page 21
