Iris Innovations IRIS490, Руководство пользователя

Страница: 7 / 16

Version 1.01. March 2017. ©Iris Innovations Limited. www.boat-cameras.com . info@boat-cameras.com
7/16
Connections
Warning: Installation of this product must only be carried out by a marine electronics
professional or competent person. Failure to observe these installation guidelines and
good electrical practices could result in fatal damage to the product, other on board
equipment and personal injury. Observe electrical codes and practices of the region in
which the device is being installed.
When installing on board, it is essential to observe electrical safety precautions
associated with the
installation and operation of DC powered electronic equipment in and around water.
Ensure the waterproof
integrity of the camera, cables and connection of the device are never breached or
compromised. Always
power the device from an appropriately rated fuse board or distribution panel.
Connections
The IRIS490 has a short breakout cable with a DC power jack socket and an RJ45
socket, which allows connections for power and data.
Power over Ethernet (PoE) (Standard)
As standard, power to the camera is delivered via the CAT5e STP ethernet connection
from a PoE
ethernet hub (not supplied). Always use suitably rated CAT5e STP cable, with straight-
through pin to pin wiring.
DC Power Supply (Optional)
If no PoE Ethernet hub is available, the IRIS490 may be powered by an optional 12V
DC supply. Although the camera draws much less current during operation, allow for a
2A peak surge during power up. Always use suitably rated cable to deliver power to the
camera.