Iris Innovations IRIS490, Руководство пользователя

Страница: 8 / 16

Version 1.01. March 2017. ©Iris Innovations Limited. www.boat-cameras.com . info@boat-cameras.com
8/16
Setup
Setup
1. Connect the camera to a powered Ethernet source so that the unit is connected
directly or indirectly to a
DHCP server.
2. The camera will adopt an I.P. address provided by the DHCP server. Please refer to
Router/DHCP server manual for relevant instructions on performing this.
3. Once this is connected, new I.P and network details can be set via the Network
setup page (page 18).
4. In the event of there being problems connecting the camera to your network, please
contact your network
administrator or IP specialist quoting the cameras individual MAC address which can be
found printed on the carton label.
Accessing the Camera
Viewing Live Video
Once the camera has been correctly addressed and set up on your network, live video
can be viewed in
three ways:
Internet Browser:
Simply launch your internet browser and enter the IP address of
the camera.
RTSP Player:
The live video from the camera can be played with RTSP players such as
VLC or
QuickTime. The camera supports multiple simultaneous video streams (See
Video &
Audio / Video
Settings
). To gain access to the camera for each video stream, the RTSP URL will be
required. The
default paths for the 2 streams are
ʻ stream1 ʼ and ʻ stream2 ʼ . The URL format should be
input as below:
Stream1: rtsp://Camera_IP/stream1
Stream2: rtsp://Camera_IP/stream2
NVR / CMS Software:
The IRIS490 camera is an ONVIF compatible product. Most
ONVIF compatible
NVR / CMS software can retrieve the video from the camera for both live view and
recording. For
further details on compatibility and operation, please contact
the specific software vendors.