Iridium RTU4120A, Руководство по эксплуатации

Страница: 10 / 36

6
Answering a Call
NOTE: When the speaker is off you can see that you are being
called, (the display will show “Incoming Call”) but there will be
no sound in the speaker. The speaker can be toggled on and off
using:
1. When the handset rings, remove it from the hook and communi-
cate as on an ordinary telephone.
2. Adjust the volume in the earpiece or loudspeaker by means of:
3. When you want to stop communicating, or when you hear a busy
tone, hang up.
Call Transfering
A call can be transfered to another CU. The procedure depends on
whether or not the call is answered before it is transferred.
Transferring AFTER Answering
When you answer a call, the display shows:
To transfer the call:
1. Press:
2. Now, key in the extension number to which the call should be
transferred.
3. To transfer the call, press:
- or:
To cancel transferring the call, press:
Automatic Transferring BEFORE Answering
A call can be transferred to another CU automatically before it is
answered. To see if the auto transferring function is enabled,
press:
The display will show eg.:
or
The auto transferring parameters can be set up individually for each
handset in the function menu:
1. To enter the function menu, press:
2. To select the “Setup” item, press:
3. To find the “Transfer” item, use:
and press:
Connected
Enter number
_
Call is
transferred
Call trans-
fer enabled
Local:
1001
Delay: 0 sec 10
Call trans-
fer disabled
0125