iRay Technology InfiRay Jerry-F, Руководство пользователя

Страница: 15 / 19

Figure 3.2 Menu of Jerry-F
Note: The enhanced mode, brightness
percentage, and polarity mode information
will be automatically hidden after no
operation for 8s.
3.6.1 Displaying the Menu
Long press the infrared adjusting knob
for 2s. The menu is displayed. You can
turn on or off the analog video output,
compass calibration, azimuth angle, pitch
angle, and inclination angle.
3.6 Menu and Settings
S/N Icon Description
0-4 levels: When the
battery power reaches
Level 0, it indicates that
the power is below 10%,
so you should recharge
or replace the battery as
soon as possible.
The scale arrow moves
to indicate the direction
the ocular lens is facing.
-90°~+90°
-90°~+90°
Inclination angle
Pitch angle
Battery level
Azimuth
3.6.2 Menu Operation
After the menu is displayed, short press
the infrared adjusting knob to switch
among menu options and long press the
knob to enable/disable an option (in the
mode shown in Figure 3.2, you can short
3.6.3 Outline Threshold
3.6.4 PAL Video
You can turn on/off the analog video
(PAL) output of the goggle through this
option. The analog video output needs
to use the designated cable, and the
infrared video can be displayed on the
monitor connected by this cable. When
switching to the "PAL video" option, long
press the infrared adjusting knob to turn
on/off the PAL video.
But it is recommended to turn it off if you
don't need to output the analog video,
thereby saving power and prolonging
the service time.
The outline threshold specifies how much
detail is displayed in the outline mode, and
the range of threshold is 1-5. The higher the
threshold, the more outline details are
displayed. You can set it as required.
When the cursor points to the "Outline
threshold" option, long press the infrared
adjusting knob to set this option. At this
time, the threshold in brackets is in an
inverted color and can be adjusted among
1 to 5 (ascending). You can short press the
infrared adjusting knob to select the required
threshold. After selecting the required
threshold, long press the infrared adjusting
knob to exit the "Outline threshold"
option.
Note: It is recommended to adjust the
outline threshold in the outline mode,
and observe the change of outline details
corresponding to different thresholds in
real time.
4
5
6
7
press and the arrow switch to the "Compass
calibration" option, and long press it to
turn on/off analog video).
When switching to the "Exit" option, long
press the infrared adjusting knob to exit
the menu.
10
Jerry-F User Manual V1.3