iRay Technology InfiRay Jerry-F, Руководство пользователя

Страница: 14 / 19

When I 2 night vision and infrared night
vision are enabled at the same time, you
can observe enhanced night vision
images from the ocular lens. You can
switch among a variety of enhanced
display modes as needed.
3.4 Enhanced Night Vision
Figure 3.1 Jerry-F Interface
Table 3.1 Icon description of Jerry-F
In the enhanced night vision mode, short
press the I
2
knob to switch the enhanced
modes. Jerry-F has four enhanced display
modes: Outline, Target highlight, Thermal
image, and Breathing alert. Short press the
I
2
knob to switch between the four display
modes cyclically.
Caution: When the external video is
connected, "PIP of external video" and
"Full screen of external video" are
available.
Note: The Outline mode is the default
mode after the enhanced night vision is
enabled.
3.4.1 Switching Enhanced Night
Vision Modes
In the enhanced night vision mode, short
press the infrared adjusting knob to switch
the infrared thermal polarity. That is, it
switches among White-hot, Black-hot,
and Orange-hot.
Note: There are only White-hot and
Orange-hot polarities in Outline and
Target highlight modes.
3.4.2 Switching Thermal Polarity
in Enhanced Night Vision Mode
In the totally dark scenario, the I
2
night
vision should be used with the fill-in light
turned ON. You can turn the switch from
OFF to ON to turn on the fill-in light. Then,
the red indicator is steady on, which can
be seen in the ocular lens, reminding you
that the infrared fill-in light has been
turned on.
3.4.3 On/Off of Night Fill-in Light
When infrared night vision or enhanced
night vision mode is enabled, the
interface of Jerry-F is shown in Figure 3.5
and the icon descriptions are shown in
Table 3.1
3.5 Interface Information
S/N Icon Description
Enhanced display
mode
Outline, Target highlight,
Thermal image, and
Breathing alert modes
(When external videos are
connected, "PIP of
external video" and "Full
screen of external video"
modes are also available.)
Infrared brightness 0%
to 100%.
White-hot, black-hot,
and orange-hot.
Brightness of the
infrared thermal
image
Infrared polarity
1
2
3
enable infrared night vision, you need to
correct the shutter manually.
Long press the I
2
knob for 2s to manually
correct the shutter. You can hear the
shutter click during the correction. The
correction time is less than 1s.
9
Jerry-F User Manual V1.3