iRay Technology InfiRay Jerry-F, Руководство пользователя

Страница: 11 / 19

2.1 Assembly/Disassembly
You can use Jerry-F in two modes:
handheld or mounted on a helmet.
Assemble the equipment as instructed
after you decide how to use it.
Before use, install the batteries.
Jerry-F uses two 18650 lithium-ion
batteries. The installation procedure is
as follows:
Unscrew the two covers of the battery
compartments.
Check the polarity of the batteries and
place the batteries into the designated
position with the correct polarity.
Tighten the covers of the battery
compartments.
In handheld use, no helmet support is
required. What you need are the main
body of the goggle and the battery
holder. The procedure for installing
Jerry-F for handheld use is as follows:
Take out the main body of the goggle and
the battery holder.
Install the ocular lens hood if needed.
Align the broad side of the battery holder
with that of the goggle in the correct
direction.
Press the battery holder until it clicks and
the assembly is completed.
Chapter 2 Assembly and Power-up for Use
Figure 2.1 Installing the
batteries for Jerry-F
Figure 2.2 Jerry-F for handheld use
The procedure for disassembling handheld
Jerry-F is as follows:
Turn off the infrared I 2 switch of the
goggle and the main power of the battery
holder.
Pull out the disassembly pull of the
battery holder and lift it upward.
Separated the battery compartment and
the main body of the goggle.
Figure 2.3 Disassembling
handheld Jerry-F
6
Jerry-F User Manual V1.3