Iradion Infinity 1625, Руководство оператора

Страница: 16 / 34

13
Mounting
On the bottom of the laser there are 22 mounting holes provided (4mm x 9mm deep).
The laser must be mounted on three (3) points so that no stress is imparted to the
structure. The mounting holes are provided so the user can select 3 holes or 3
sets of holes to attach mounting pads. The mounting pads must create a minimal
space under the laser.
The simplest mounting would be with three (3) spherical washers using two (2) of the
holes in the front corners and one (1) in the center rear. For increased mounting
strength, a cluster of three or four holes in a corner can be used to attach a mounting
bracket of the user
’s design. Three of these mounting brackets would make up the 3-
point mounting. This might be a better solution for situations in which the laser is
mounted to a gantry that imparts accelerations to the laser with associated high
stresses at the mounting points.