Iradion Infinity 1625, Руководство оператора

Страница: 12 / 34

9
System Overview
This Iradion laser is a waveguide las
er with a “slab” unstable optical resonator. The
beam is corrected by a patented internal correction scheme to generate a nearly round
beam.
The Iradion 1625 CO
2
laser is rated at 250W and includes an integrated RFPA and
separate power supply/air supply in 2 packages. Connectors in the rear provide the
interface to control signals, power, water, air and returns diagnostic signals and faults
signals. Connector pins and associated electronics are protected against static ESD
damage. DC power and filtered air is supplied from a separate unit designed to
maintain the proper voltage, current and airflow to avoid system faults.
Because this laser is small with a low thermal mass, it becomes overheated internally in
only 60 seconds without cooling. Although it does have a thermal protect function, the
1625 depends on the flow of water to stay cool. For that reason, the 1625 monitors the
actual flow rate of water and will fault below or above specified limits.
(See section on
cooling.)
The 1625 also includes airflow monitoring and will fault if the airflow is too high or low.
Because the exact regulation of house air can be difficult, the 1625 comes with a
specially configured air pump and filters. Internal sensor settings ensure that the laser
will operate without faults when fed from this pump.
This laser will not operate
without an air source. (See section on air flow.)
The 1625 also includes an RS232 interface to allow monitoring of the settings and
flows. Iradion can provide a special Windows™ based application that reports
parameters including water and air flow as well as the voltage, temperature, fault codes,
serial number and other parameters.
This Iradion laser is class IV laser product that can burn skin, start fires and generate
smoke. Proper smoke evacuation may be required. A proper target or backstop must
be provided.
This model can exceed 300 Watts of power under normal operation.