IQue Trinidad2200, Руководство пользователя

Страница: 14 / 55

Model2310 Ver.14.0
13
Heat Mode-Ready vs. Rest
Press the Select button to adjust the heat mode. Then press the select button to confirm the
selection.
Ready mode: the heater circulation pump runs continuously, Since the heater circ pump is always running, the
spa will maintain set temperature and heat as needed in Ready mode.
Out of the Filtration & Heating time but the circ pump starts automatically when sensors detected a 05. Degree
℃
drop from the setting temperature and stops once it has reached the set temperature.
Rest mode: the spa will only heat to set temperature during programmed filter times even though the water is
being filtered constantly when in the circulation mode.
Both mode If the circ pump is out of Filtration time &Heating, every time when any of jets pumps or the
blower’s button is pressed to activate, no matter the jets pumps work in low speed or high speed, at the same
time the circ pump will start to work with the pumps or blower, when the pumps or blower turn off the circ pump
will keep working for up to 1 minute then stop.
Time of day
Setting the time-of-day is important for determining filtration times and other background features.―Set Time‖
will appear on the display if no time-of-day is set in the memory.
On the Settings Screen, select the Time-of-Day line. On the Time-of-Day screen, simply navigate right and left
to select the Hour, Minutes, AM/PM and 12/24 Hour segments. Use the Up and Down Buttons to make changes
Saving Settings
The Time-of-Day screen is a simple, editable screen that illustrates a feature of the control that applies to all
other editable screens as well. When changes are made, the icon to go ―Back‖ changes to ―Save‖ and a new
icon for ―Cancel‖ appears under the Save icon. Navigating to the left will highlight the Save icon, and
navigating down from there will allow the user to cancel the pending change. Pressing the ―Select‖ button
will save or cancel the changes and go back to the previous screen.