IQue Trinidad2200, Руководство пользователя

Страница: 11 / 55

Model2310 Ver.14.0
10
WARNING

Main Power to system should be turned OFF BEFORE adjusting DIP SWITCH

Persistent Memory (A6) must be RESET to allow new DIP switch settings to take effect
To reset Persistent Memory:
1. Power down.
2. Set A6 ON
3. Power up.
4. Wait until ―Pr‖is displayed on your panel.
Note: If ―CFE ‖appears means DIP switch configuration is wrong!.
5. Power down and then set A6 OFF.
6. Power up again
(c)Configuration
Control Panel TP800
Priming Mode
After the power up and the initial start-up sequence, the control will enter Priming Mode and display a
Priming Mode screen. Only pump icons appear on the priming mode screen. The system will
automatically return to normal heating and filtering at the end of the priming mode, which lasts 4-5
minutes. During the priming mode, the heater is disabled to allow the priming process to be completed
without the possibility of energizing the heater under low-flow or no-flow conditions. Nothing comes on
automatically, but the pump(s) can be energized by selecting
the “Jet” buttons. it can be turned on and
off by pressing the “Circ Pump” button during Priming Mode Manually exit Priming Mode by pressing
the “Exit” Button.