Model 2100,2080,2000 Ver.14.0
19
9. OPERATING INSTRUCTIONS
MESSAGE’S DISPLAYED ON THE CONTROL PANEL
Message
Meaning
Action Required
No message on display
Power has been cut off to the spa
The control panel will be disabled until
Power returns.
Spa settings are preserved on all systems
OHH
"Overheat‖ – The spa has shut down.
On some systems, an alarm may sound.
One of the sensors has detected 118’F
(approximately 47.8’C) at the heater
DO NOT ENTER THE WATER. Remove
the spa cover and allow water to cool.
Once the heater has cooled, reset by
pushing any button. If spa does not reset,
shut off the power to the spa and call your
dealer or service organization
OH5
―Overheat‖- The spa has hut down. One
of the sensors has detected that The spa
water is 110’F (approximately 43.3’C)
DO NOT ENTER THE WATER. Remove
the spa cover and allow water to cool. At
107’F (approximately 41.7ºC), the spa
should automatically reset. If spa does not
Reset, shut off the power to the spa and
call your dealer or service organization
ICE
―Ice‖- potential freeze condition
detected.
No action required. The pumps and the
blower
will
automatically
activate
regardless of spa status.
5Nr
Spa is shut down. The sensor that is
Plugged into the sensor ―A‖ jack is not
Working
If the problem persists, contact your dealer
or service organization. (May appear
Temporarily in an overheat situation and
Disappear when the heater cools.)
5nb
Spa is shut down. The sensor that is
Plugged into the sensor ―B‖ jack is not
Working
If the problem persists, contact your dealer
or service organization. (May appear
Temporarily in an overheat situation and
Disappear when the heater cools.)
