The iQniter Smart Sensor uses a 3-Volt lithium cell CR2025. With Suunto
Movescount App, you can check the battery status from the device information
when the iQniter Smart Sensor is paired.
REPLACING THE BATTERY
1
Remove the sensor firmly from the belt
2
Open the battery cover
3
Replace the battery (Smart Sensor CR2025). Ensure that the battery switch
(red arrow 3) is NOT UNDER the battery.
4
Place the new cover with sealing ring. First inset the cover in the battery
switch side (red arrow 4)
5
Firmly close the battery cover (red arrow 5)
Note: We recommend always to use a new cover to ensure a prober sealing
when replacing battery
BATTERY
3
4
5
