Fitting the timeswitch
If surface wiring has been used, remove the knockout/insert from
the bottom of the timeswitch to accommodate it.
Loosen the two ‘captive’ retaining screws on the bottom of the
backplate. Now fit the timeswitch to the backplate, ensuring the
lugs on the backplate engage with the control.
Swing the bottom of the control into position ensuring that the
connection pins on the back of the unit locate into the terminal
slots in the backplate. Tighten the two captive retaining screws to
fix the unit securely. Then switch on the mains supply. On
completion of the installation please reset the timeswitch -
detailed below.
8
End view of CP017
timeswitch
