iQTS244
Operator’s Manual
888-274-7744
www.iqpowertools.com
En
gli
sh , E
N
D) Remove any adjusting key or wrench before
turning the power tool on.
A wrench or a key left
attached to a rotating part of the power tool may
result in personal injury.
E) Do not overreach. Keep proper footing and
balance at all times.
This enables better control of
the power tool in unexpected situations.
F) Dress properly. Do not wear loose clothing or
jewellery. Keep hair and clothing away from moving
parts.
Loose clothes, jewellery or long hair can be
caught in moving parts.
G) If devices are provided for the connection of
dust extraction and collection facilities, ensure
these are connected and properly used.
Use of dust
collection can reduce dust-related hazards.
H) Do not let familiarity gained from frequent use of
tools allow you to become complacent and ignore
tool safety principles.
A careless action can cause
severe injury within a fraction of a second.
4. POWER TOOL USE AND CARE
A) Do not force the power tool. Use the correct
power tool for your application.
The correct power
tool will do a better job and safer at the rate for which
it was designed.
B) Do not use the power tool if the switch does
not turn it on and off.
Any power tool that cannot
be controlled with the switch is dangerous and
must be repaired.
C) Disconnect the plug from the power source and/
or remove the battery pack, if detachable, from
the power tool before making any adjustments,
changing accessories, or storing power tools.
Such preventative safety measure reduces the risk
of starting the power accidentally.
D) Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the power
tool or these instructions to operate the power tool
.
Power tools are dangerous in the hands
of untrained users.
E) Maintain power tools accessories. Check for
misalignment or binding of moving parts, breakage
of parts and any other condition that may affect the
power tool’s operation. If damaged, have power tool
repaired before use.
Many accidents are cause by
poorly maintained power tools.
F) Keep cutting tools sharp and clean.
Properly
maintained cutting tools with sharp cutting edges are
less likely to bind and easier to clean.
G) Use power tool, accessories and tool bits etc.
in accordance with these instructions, taking into
account the working conditions and the work to
be performed.
Use of the power tool for operations
different from those intended could result in a
hazardous situation.
H) Keep handles and grasping surfaces dry, clean
and free from oil and grease.
Slippery handles and
grasping surfaces do not allow for safe handling and
control of the tool in unexpected situations.
5. SERVICE
A) Have your power tool serviced by a qualified
repair person using only identical replacement
parts.
This will ensure the safety of the power tool is
maintained.
B) Replacement of the plug or the supply cord shall
always be carried out by the manufacturer of the
tool or his service organization.
C) Keep liquid clear of the parts of the tool and away
from persons in the working area.
SAFETY RULES
1.4
