iQTS244
Operator’s Manual
888-274-7744
www.iqpowertools.com
En
gli
sh , E
N
CONNECTING THE VACUUM MOTOR POWER
The vacuum power supply cable from the support
arm needs to be routed through the cable retainer.
Snap the cable retainer closed securing the cable.
Plug the vacuum power cable into the vacuum power
supply receptacle.
ASSEMBLING THE TABLE EXTENSION
Remove the table extension from packaging. Insert the
extension shafts into the right side of rolling table.
With a Phillips screwdriver, install screws in each end of
extension shaft to secure
INSTALLING THE ROLLING TABLE
Put the remove table lock lever in the down position.
This allows the rolling table to be installed or removed.
ASSEMBLING
6.3
