Changing the PPPoE Network Setting.
The Network page has a PPPoE icon the upper left. Follow the steps below to change the PPPoE setting.
1. Click
the
PPPoE
button on the upper left menu to enter the “PPPoE Settings” page.
2.
Activate the “Enable” or “Disable” status of the PPPoE Settings.
3.
Enter the PPPoE “Username” and the PPPoE “Password” then confirm the password again.
4.
Click on the
Submit
button to save the setting.
NOTE: Please refer to section 4.1.3.8 (PPPoE & DDNS) for more details.
Functions:
PPPoE Setting
If you use the DDK-1801BC to connect directly to the Internet, you will
need to enter the username and password which were given to you when
you set up your account with your Internet Service Provider. If the
DDK-1801BC is behind a router or a gateway you do not need to configure
this setting.
Username:
Enter Username here
Password:
Enter Password here
38
