Product Description of BRT-310
Page 2 of 7
Shenzhen Asia Bright Industry co., Ltd., Building 10, Asia Industrial Park, Gangtou, Bantian, Shenzhen, China.
© 2015 All rights reserved. Subject to change without notices.
Specification Parameters:
Input Voltage
220
～
240V(50Hz/60Hz)
Operation
Environment
No-condensation 20-90% RH
，
-20
℃～
40
℃
Control Mode
IR
Control
Distance
7m
PIR Coverage
Range
5m in diameter when
mounted at a height of 2.4m
Mounting Hole
Diameter
68mm
Dimension
(max)
Oval faceplate: 105mm
Circular faceplate: 77mm
Weight
110g
Wiring Diagram:
BRT-310 PIR remote control requires both hot wire and neutral wire for installation:
Hot wire (ACL):
Coming from the power line with 220V;
Neutral wire (ACN):
Usually coming with the hot wire; and
Fig. 3
BRT-310 Wiring Diagram
Fig. 3 shows the wiring diagram. Wiring must be done according to the diagram and the labelled
ports of the control.
Installation Guide:
There are two ways to install BRT-310 PIR remote control to the ceiling. Fig. 4 and Fig. 5 show
the step-by-step installation instructions, respectively.
Cautions:
1.
Avoid mounting the control close to air vents, as the vibration and air flow can reduce its
effectiveness;
