Product Description of BRT-310
Page 4 of 7
Shenzhen Asia Bright Industry co., Ltd., Building 10, Asia Industrial Park, Gangtou, Bantian, Shenzhen, China.
© 2015 All rights reserved. Subject to change without notices.
(Attach the electrical wires as shown in the Wiring Diagram Fig. 3).
Step two:
Open the two flexible clamps on the side surface of the remote control;
Step three: Insert the remote control into the hole; and
Step four:
The clamps will hold the remote control onto the ceiling tight and steady.
Fig. 5
Installation without a Holder
Operation Guide:
BRT-310 PIR remote control needs a warm-up time about two minutes before it can operate
properly. It has dip switches for adjusting the delay-off time, as shown in Fib. 6. For the first time
operation, BRT-310 PIR remote control also needs to learn and memorize the IR remote control
codes from regular remote control set. BRT-310 PIR remote control has a button for this task as
shown in Fig. 6 as well.
