Product Description of BRT-112
Page 2 of 4
Shenzhen Asia Bright Industry co., Ltd., Building 10, Asia Industrial Park, Gangtou, Bantian, Shenzhen, China.
© 2015 All rights reserved. Subject to change without notices.
There is one on/off button on the front, and there are wiring terminal blocks on the back. The
button is backlit with blue light.
Specification Parameters:
Input Voltage
180
～
250V(50Hz/60Hz)
Operating
Temperature
-20
℃～
55
℃
Wattage
2000W
Relative
Humidity
No-condensation 20-90% RH
Mounting Hole
Spacing
60mm
Matching
Box
75mm x 75mm x 50mm
Dimension
86mm x 86mm x 38mm
Weight
140g
Wiring Diagram and Installation Guide:
BRT-112 glass touch screen timer switch only requires hot wire for installation:
Hot wire (ACL):
Coming from the power line with 220V;
Load wires:
Going to the load.
Fig. 3
BRT-112 Wiring Diagram
Warning:
Please make sure power is turned off before starting installation!
Fig. 3 shows the wiring diagram and Fig. 4 shows the step-by-step installation instructions. There
are three easy steps:
Step one:
Use a screwdriver to pry off the front plate in position A;
Step two:
Wiring according to the diagram and the labelled ports of the switch; and
Step three: Install the switch to the wall box using screws and put back the front plate.
