background image

UDM10006-05   

USA 2324 TB Manual 

 

13 

UM 176TW / UM676TW 

Carton Specifications 

Type 

Regular Slotted Containers (RSC) 
 

Material 

125 to 275 PSI bursting test, single or double wall B or C flutes. 
 

Weight 

0 to 85 lbs. (0 to 38.5 kg) 

Size 

 
The carton sealer can accommodate most cartons within the size ranges listed bellow.  
 

 
 
 

 
 
 
However, if the box length (in direction of seal) to box height ratio is .75 or less, than 
several boxes should be test run to assure proper machine performance. The formula is as 
follows; 

CARTON LENGTH IN DIRECTION OF SEAL  

> .75 

CARTON HEIGHT 
 

2” TAPE HEAD 

 

 

 

Carton Size 

Length

Width

Height

Minimum 

7” (127mm) 

9 ½” (241.3mm ) opt. 

7” (127mm) 

9 ½” (241.3mm ) opt. 

2” (51mm) 

Maximum 

Infinite (Infinite) 

23” (584mm) 

26 ½” (673.1mm) opt. 

24” (610mm) 

3” TAPE HEAD 

 

 

 

Carton Size 

Length

Width

Height

Minimum 

7” (127mm) 

9 ½” (241.3mm ) opt. 

7” (127mm) 

9 ½” (241.3mm ) opt. 

2” (51mm) 

Maximum 

Infinite (Infinite) 

23” (584mm) 

26 ½” (673.1mm) opt. 

24” (610mm) 

Содержание USA 2324-TB



































































Отзывы: