IPG USA 2324-TB, Руководство по эксплуатации

Страница: 14 / 66

UDM10006-05 USA 2324 TB Manual 14
UM 176TW / UM676TW
SET-UP PROCEDURE
Receiving and Handling
The machine is shipped to the customer in a box and fixed to a pallet.

Remove the strapping and the staples at the bottom of the box.

Lift off the box cover and sleeve.

Remove the mounting bolts and nuts, which secure the USA 2324-TB to the
shipping pallet.

Lift the machine off the pallet and install it in your packaging line.

Remove all tie wraps and other shipping materials.
Note: After unpacking the machine, look for any damage that may have occurred
during shipping. Should the machine be damaged, file a claim with the transport
company and notify your Intertape representative as soon as possible.
Set-Up
The Carton Sealer must be installed on a near level ground. Use the adjustable legs to
ensure that the machine is level and firmly on the ground (no rocking). Adjust the leg
height with the four (4) telescopic adjustment legs to accommodate conveyor heights
from 24 to 30 inches.
To adjust the Carton Sealer height, jack up
the machine to give ample room to extend
the legs. Using a 19 mm box end wrench,
loosen the eight (8) 12mm hex. head bolts.
Adjust the legs to the desired conveyor
height and tighten the bolts. Etched lines
on the legs ease leveling.
Figure 9
Customer supplied feed conveyor (if used) should provide straight and level entry into
the carton sealer. Customer supplied exit conveyor (if used) should be straight and
declined no more than 20mm/meter away from the machine to convey the sealed cartons
away from the machine.