ipf electronic UY000001, Инструкция по эксплуатации

Страница: 14 / 40

Commissioning
page
14
8 Commissioning / Appli
c
ation
Please first observe the safety instructions in section 3
8.1 Switch on
Hold down the power button for about 1 second, the power will turn on, and a start-up sequence will
appear on the display. Pressing the button again switches the device off again.
On-Off button, see device components and controls
8.2 Headphone Volume Loud / Volume Down
The volume keys increase or decrease the volume in the headphone in 16 levels.
Continuously pressing the button automatically increases / decreases the value.
Volume up / down buttons for headphone volume, see device components and controls
Please make sure the headphone level is <50% before putting on the headphones.
8.3 Sensitivity level
When starting a leak detection or after switching on the sensitivity level "Auto" should be selected.
In the case of strong noise levels from the environment it can be switched to a manually adjustable
gain level, see „Setting of Sensitivity level“ .
Automatic sensitivity level at measurement start: 10 – 70dB
8.4 Laser On/Off
The laser pointer can only be switched on or off via the laser on / off button in the display (not via
the membrane keypad). When switched on, the display shows a laser warning symbol.
Please note the warnings for laser operation!
Avoid direct / indirect (via reflexion) irradiation of the eyes in humans and animals!
Laser „On“ Icon