Device components and controls
page
13
7.9
Assembly with Gosseneck
Due to its flexibility, the gooseneck tool is used for punctual measurements in hard-to-reach areas.
Connection to the
leakage device
is
possible
via the supplied spiral cable, see Figure 10.
It is
no longe
r possible to use the camera.
To remove the component, remove the connection cable by pressing the release button on both sides
and pulling off the cable.
Picture 10
7.10
Assembly with Parabolic mirror
The parabolic mirror is used for measurements at greater distances as well as for high requirements
regarding selectivity and location of leakage positions.
Connection to the
leakage detector
is via the supplied spiral cable, see Figure 11.
To remove the component, remove the connection cable by pressing the release button on both sides
and pulling off the cable.
Picture 11
Note:
To use the parabolic mirror and gooseneck, these components must be activated in the
lea
k
age
detector
during initial commissioning in order to save the component-specific adjustment parameters. If
this has not already been done ex-works, the data for this is supplied via USB stick. For
the activation (parameter import), see chapter "Export / Import".