1. IMPORTANT SYMBOLS
This warning triangle indicates special safety instructions and warnings, which, if not observed,
may result in special cases in:
•
Personal injuries
and/or
•
Significant property damage
may occur
Indicates a source of electrical danger
Notes
Includes important additional information OR indicates that care is required to proceed
Explanation
Marked text positions that provide background information and that are important for explana-
tion of their importance
2. SAFETY INSTRUCTIONS FOR USE
In case of use in an industrial plant environment, the safety instructions of the plant manufacturer and the operator of
the plant shall apply above all!
Structures in the environment around the plant may only be completed by personnel with corresponding technical
qualifications. These persons must be aware of possible dangers.
All works in the environment of the plant must be completed free of voltage (main switch shut off) and free of pres-
sure.
The plant must be locked off against unintended activation during setup and tear-down work. Caution against danger-
ous residual energy in the system!
In case of mechanical work (attachments), the personnel must observe the load supporting values of all parts and pre-
vent possible dangers.
Lay out the cables so that no one is able to step on them or trip over them!
Prior to start-up, inspect the correct electrical activation of the camera!
In case of property damage and personal injury that are caused by incorrect handling or failure to observe safety in-
structions, we shall not be liable. The guarantee shall expire in these cases.
Never replace the components with another type of component. Any use of other components than those in their
original condition shall require inspection by the manufacturer and their written approval!
A guarantee may only be provided following correct use together with the included components.
Never look directly into the LED lamps. High-speed recordings require very bright illumination that may be damaging
to the human eye.
Handle the components of the highspeed camera with care. The illumination, lenses, and cameras in particular require
careful handling. These components may only be cleaned with special lens cleaning brushes.
OC29 X.Lite ProCap is not a toy and does not belong in the hands of children. Operate it outside of the reach of chil-
dren. Keep the packaging material, e.g. foil, away from children. Danger of asphyxiation in case of misuse.
The product is not approved for use in safety-relevant applications. If use in a safety-relevant application is planned,
the customer shall be responsible for the required approvals.
MANUAL • Subject to alteration! Version:
September 2019
ipf electronic gmbh • Rosmarter Allee 14 • 58762 Altena
│
Tel +49 2351 9365-0 • Fax +49 2351 9365-19
│
[email protected] • www.ipf-electronic.com
2
