10. NOTES
1. A green lighting LED on the rear side of the housing indicates the ac-
tive camera. No statement about the connection to the PC!
2. Only operate teh camera with the lens screwed in to ensure better
heat dissipation.
3. If the camera temperature gets too high due to the environmental
conditions, counteract this with extensions or thermal paste.
4. A C-mount thread is used to connect the lens to the camera. The
standard lenses featuring fixed local distance are fastened directly by
screwing them into the camera. In order to preserve the camera, the
zoom lens may be mounted using a AO000565 fastening adapter (with
¼“ tripod thread).
5. Function of the adjuster rings on the lenses:
a. Zoom lens AO000564
b. Standard lenses
11. LICENSE CONDITIONS
1. Software and drivers from partner companies must be installed for the use of the OC29 X.Lite ProCap. Please note
the respective license conditions during installation!
2. Following payment, ipf electronic grants the customer temporally unlimited rights to use the software within the
scope of the contract. In light of any special agreements between the parties, this includes the installation, loading,
and execution of the software on the customer's computers and production of necessary backup copies. The customer
shall not be entitled to rent, to loan, or to provide the software to third parties in any other commercial manner.
(Schärfe)
(Helligkeit)
MANUAL • Subject to alteration! Version:
September 2019
ipf electronic gmbh • Rosmarter Allee 14 • 58762 Altena
│
Tel +49 2351 9365-0 • Fax +49 2351 9365-19
│
[email protected] • www.ipf-electronic.com
14
